Table Of Contents
This manual discusses four hardware types generally as follows.
- The Basic Hardware is the DLP-IO8-G data acquisition module. It has 10 bit resolution and is software clocked. To buy that hardware please email sales@vvi.com or consult a retailer such as DIGIKEY www.digikey.com or if you are not in the United States then a retailer local to your area.
- The Standard Hardware can be hardware clocked to 100 Hz has 12 bit resolution and has output channels for feedback loops. To buy that hardware please email sales@vvi.com.
- The Pro Hardware can be hardware clocked to 50,000 Hz has 12-16 bit resolution and has output channels for feedback loops. To buy that hardware please email sales@vvi.com.
- The Serial Port Hardware is any serial port based system that responds to the command set implemented by DAQ Plot and as defined in this manual. Many data loggers and modular data acquisition hardware fit this description.
For other hardware and custom driver solutions email support@vvi.com.
The following is a brief list and description of the Hardware sections:
| Hardware |
| Basic | Describes the Basic DAQ Hardware. |
| Standard | Describes the Standard DAQ Hardware. |
| Pro | Describes the Pro DAQ Hardware. |
| Serial Port | Describes plausible (as yet unspecified) Serial Port hardware. |
| Sound In | Describes the Sound In hardware (your computer's microphone). |